NavCom SF-3050 Logging Data to Internal Memory or SD Card - Manual (Page 4)

Applications Note – Logging Data to Internal Memory
or SD Card Support
Rev. A 4 January 2012
k. [OUTPUT]MSGVERSION,ONTIME,60,FH1
l. [OUTPUT]MSGPRODUCTINFO,ONTIME,60,FH1
m. [OUTPUT]RADIOSTAT,ONTIME,10,FH1
n. [OUTPUT]SDCARD,ONCHANGE,,FH1
4. Save settings to receiver profile so you don’t have to reconfigure messages
again: [PROFILE]SAVEAS “XXXX”
5. Start Data logging by issuing the following command:
[LOGFILE]A:,FORCESTART
6. To Stop Data logging issue the following command: [LOGFILE]A:,STOP
7. To Start Data restart logging issue the following command:
[LOGFILE]A:,START