NavCom Rinex Utility Rev.D - Manual (Page 9)

RINEX Utility – Rev D
8
File I/O
Figure 2: Input File and
Output Directory
Refer to Figure 2 for the steps below:
File Naming Convention
The RINEX protocol requires a specific format for the output file. If you select multiple files with
the same first four characters, each subsequent file will over-
write and “crash” those processed
earlier. This really can't be helped, and the recommended approach is to rename the input files
to each have a unique name, and then check the "use file name as marker" check box to see
the file name in the Observations file."