NavCom SF-2050 Rev.E - Manual (Page 42)

SF-2050 User Guide - Rev. E
Connector Assignments
•Data Interfaces:
2 serial ports; from 1200 bps to 115.2 kbps
CAN Bus I/F (SF-2050M Only)
Event Marker I/P (SF-2050M Only)
1PPS (SF-2050M Only)
Input/Output Data Messages
• NCT Proprietary Data: PVT
Raw Measurement
Satellite Messages
Nav Quality
Receiver Commands
• NMEA Messages ALM, GGA, GLL, GSA,
(Output Only): GSV, RMC, VTG, ZDA, GST
Proprietary NMEA Type SET
(Output Only)
• Code Corrections:
RTCM 1 or 9
WAAS/EGNOS
StarFire
™
• RTK Correction Data (I/O) v.2.2: NCT Proprietary
RTCM 18,19 or 20,
CMR+/CMR (Msg. 0, 1, 2)
‡ RTK data only available in SF-Series receivers optioned
for RTK Extend operation.
LED Display Functions (Default)
• Link StarFire
™
Signal Strength (Default)
(User Programmable)
• Base Station N/A in Standard SF-2050 Configuration
(User Programmable)
• GPS Position Quality
A-40