Nevion FRS-3G-DUAL - Manual (Page 24)

FRS-3G-DUAL Rev. B
nevion.com | 24
misc 0 - NOT AVAILABLE
BY COMMAND.
ONLY FOUND in
Conf 0 prog | fin
' ' | ovr Misc info
prog if the card is freshly
programmed by the bootloader and
the program is still un-finalized. fin is
the normal condition.
ovr if DIP-switch 16 is set to the ON
position and the card is under DIP-
switch control.
Note 1: The info part of misc has
additional functionality when locate
is used: locating <remaining
seconds>. This enables a visible
countdown clock in Multicon
GYDA, but is not a required part of
FLP400.