Nortec HumDigital - Manual (Page 21)

Created: 04.06.2007
21
Changed: 21.12.2007
Printed: 02.03.2009
4. Re-insert the SD card in the HumCenter.
5.
Select the “HumCenter” menu.
6.
Press the “SETT” key and select "Reboot system".
HumCenter V1.06 d
Save Configuration
Load Configuration
Reboot System mmm
Code: ****
SETT
7.
Confirm the request with “yes” and keep the “HumCenter” key pressed
during the reboot until “Flash Programmer” appears in the display. The
new software is now automatically updated.
After the installation, restart the HumCenter. All previous settings are retained.