Ò³ãæ 22, 7 heading alignment setting, 8 language setting – Onwa Marine Electronics KAP-866 User Manual

Page 22

Advertising

2.2.7 Heading Alignment Setting

Adjustment of heading might be needed during installation. Usually a fixed

error in all direction would exist. It is due to the mechanical error when

fixing.

1) Rotate the Knob to select "HEADING ALIGNMENT SETTING" in the inst-

allation menu. Press the Knob to show the following window:

2) Rotate the Knob to change the heading alignment setting and press the Knob

to save the change or press [ESC] to exist the window with out save the

change.

2.2.8 Language Setting

Choose different languages for different users.

1) Rotate the Knob to select "LANGUAGE SETTING" in the installation menu.

Press the Knob to show the following window:

2) Rotate the Knob to select desire language and press the Knob to save change

or press [ESC] to exit without save the change.

SELECT REMOTE UNIT

SELECT RUDDER FEEDBACK UNIT

SELECT MAGNETIC SENSOR UNIT

TRIM SETTING

INSTALLATION MENU

AUTO HEADING ADJUST

MANUAL HEADING SETTING

HEADING ALIGNMENT SETTING

LANGUAGE SETTING

Heading alignment setting

Cancel [ ESC] ok [E NT]

134

+ 00