Ò³ãæ 32, 4 installation of solenoid – Onwa Marine Electronics KAP-866 User Manual
Page 32
Advertising
3.4 Installation of solenoid
3.4.1 Connect common positive solenoids as follow. If the rudder goes to
reverse direction against KAP-866 command then you need to reverse the
connection of Motor 1 & Motor 2.
3.4.2 Connect common negative solenoids as follow. If the rudder goes to
reverse direction against KAP-866 command then you need to reverse the
connection of Motor 1 & Motor 2.
Motor 1
Clutch+3
27
AUTOPILOT
COMPASS
REMOTE
RUDDER
MOTOR
ALA/RUDM
NMEA I/O
POWER IN
Motor 2
Negative lead of
power supply
Positive lead of
power supply
AUTOPILOT
COMPASS
REMOTE
RUDDER
MOTOR
ALA/RUDM
NMEA I/O
POWER IN
Hand lever (Option)
Port solenoid
St'b solenoid
Motor 1
Clutch+3
Motor 2
Hand lever (Option)
Port solenoid
St'b solenoid
Advertising