OpenEye Gen6 X-Series - Manual (Page 33)

34
1. Exit to Windows by clicking Exit on the Display screen, and then clicking Restart in Windows
Mode .
2. Click OK .
3. Click Start ( ) , and then click Control Panel .
4. Click Date and Time , and then click Change Date and Time .
5. Adjust the Date and Time.
6. When finished, click OK , and then click OK again.
7. Close any open windows.
8. Click Start , and then click Shutdown .
9. Select Restart .
Exporting Settings
Exporting settings can help configure multiple recorders quickly or reconfigure a unit that has been reset
to factory defaults. Some things must be kept in mind when using this feature.
You cannot use this function on:

Recorders that are different models.

When upgrading from certain software versions. (This feature cannot be used when upgrading
from v4.x to v5.x)
1. Exit to Windows by clicking Exit on the Display screen, selecting Restart in Windows Mode, and
then clicking OK .
2. Click Start > All Programs > OpenEye > vFormat .
3. Click Export in the System Setting Tool section.
4. Select a location to save the settings file, and then click Save . The DVR Utility will export the
settings and automatically close.