Creating a sensor schedule (example) – OpenEye Gen6 X-Series User Manual
Page 67
68
Creating a Sensor Schedule (Example)
Sensor inputs can be programmed to instantly trigger recording on one or more camera channels when
an alarm event occurs.
Note
You must first associate the software sensors with the sensors. See the Hybrid Sensor Setup
section of this manual for more detail.
This schedule example will be configured as follows:
SUN-SAT (12AM
– 11:59 PM) cameras 1 and 2 will be activated by Sensor 3 and Sensor 4.
1.
Select
Sch01
in the
Schedule Number
list.
2.
Click the
Single Selection Mode
button to enable
Multi Selection Mode
.
3.
Select
Sun, Mon, Tue, Wed, Thu, Fri,
and
Sat
.
4.
In the
Sch01
row, click and drag your mouse to select the entire row.
5.
Click
1
and
2
in the
Camera
section repeatedly until a red
S
(sensor) appears.
6.
Click
3
and
4
in the
Sensor
section.
7.
Click
Apply
to save.