REMKO RVT 263 DC - Manual (Page 20)

Keys on the remote control
2
1
4
3
5
7
9
12
14
6 8
10
11
13
Fig. 19: Keys on the remote control
1 "ON/OFF" key
Press this key to put the unit into operation and
take it out of operation.
2 "MODE" key
Press this key to select the operating mode. The
indoor unit has 5 modes:
1. Automatic mode
In this mode, the unit works in cooling or in heating
mode.
2. Cooling mode
In this mode, the warm air in the room is cooled
down to the preset temperature.
3. Dehumidification mode
In this mode, the room is dehumidified, and in
doing so the room temperature is significantly low-
ered. It is not possible to influence the temperature
and humidity in this mode.
4. Heating mode
In this mode, the warm air in the room is heated up
to the desired temperature.
5. Recirculation mode
In this mode, the air in the room is recirculated.
Temperature selection is not possible.
3 "FAN" key
Press this key to set the desired fan speed. 4
speeds are available:
Automatic, low, medium and high fan stage.
4 "SLEEP/FRESH" key
"SLEEP" key
Pressing this key will automatically increase or
decrease the target temperature by 1 °C within an
hour in cooling and heating mode respectively.
Press this key to maintain the most convenient
temperature and save energy. This function is only
available in "Cooling", "Heating" and "Auto" modes.
If the unit is working in "SLEEP" mode, this activity
is interrupted by pressing the "MODE", "FAN",
"Speed" or "ON/OFF" keys.
"FRESH" key
Activates the unit's ion generator. This releases
negatively charged particles into the airflow, which
neutralises the influences of smoke and dust,
among other things.
5 "TURBO" key
Press this key to directly activate the oscillating
function of the fins for better air distribution in the
room.
The "TURBO" function allows the preset tempera-
ture to be reached in the shortest possible time.
Pressing this key in "Cooling mode" causes the
unit to blow a blast of cooling air into the room at a
very high fan speed.
6 "SELF CLEAN" key
This key activates the self-clean function.
7 " ▲ " and " ▼ " keys
The " ▲ " key increases the desired temperature to
30°C in 1°C increments.
The " ▼ " key decreases the desired temperature
to 17°C in 1°C increments .
8 "LED" key
This key switches the indoor unit display on and
off.
REMKO RVT...DC
20