REMKO RM Series - Manual (Page 11)

HEATING mode This mode is not supported.
In dehumidifying mode, the room temperature is reduced to 24°C. The
low refrigerant temperature causes the air temperature at the finned heat
exchanger to fall below the dew point. Any excess humdity in the air
condenses in the vaporiser. As a result the room is dehumidified. The fan
speed should be set to automatic to achieve maximum dehumidification.
In automatic mode, the fan is intermittently switched on and off.
DEHUMIDIFY Mode
DEHUMIDIFICATION
MODE MODE
Press this button to set the fan speed. One can choose between low,
medium, high and automatic fan speed.
FAN Button
FAN FAN FAN FAN
Press this button to individually adjust the air outlet fins.
One can choose between 5 fixed positions and an oscillating function.
FIN Button
Press this button to select the oscillating function for the air outlet
fins. This allows direct switching from a fixed position to the oscillating
function. The swing function improves air circulation in the room.
SWING Button
SWING SWING SWING
11