REMKO RM Series - Manual (Page 12)

TIMER Buttons
These buttons are used to program the switch-on and switch-off times.
Pressing the Timer On and Timer Off buttons activates the timer and
extinguishes the clock on the display. The timer symbol for the switch-
on/off time will flash. The Timer symbol on the indoor unit is lit. Press
the HR. and MIN. buttons to set the desired switch-on/off time. If set
successfully, the Timer symbol will flash a further 30 seconds. The unit
automatically switches on or off once the programmed time is reached.
If the indoor unit is switched on automatically, the previously set mode,
temperature and fan speed are activated. The switch-on/off time can be
prematurely cancelled by pressing the appropriate Timer button or ON/
OFF button. The timer symbol on the indoor unit extinguishes.
TIMER Button ON
Timer On HR/MIN 30 sec.
TIMER Button OFF
TIMER Button ON/OFF
Timer Off HR/MIN 30 sec.
Unit On Unit Off
Example:
The controller switches on at 10:20.
The unit remains operational until 5:00.
Press these buttons to activate a program which will raise the target
temperature in cooling mode by 1 °C and 2 °C after 1 and 2 hours
respectively. The unit automatically switches off after 8 hours.
SLEEP Buttons
SLEEP SLEEP SLEEP
The controller switches the unit on and off at the programmed times.
During operation, all the settings and the timer symbol are shown on the
display. If the unit is not running, the display indicates and the timer
symbol is shown.
REMKO RM
12