REMKO SuperTec-Monitor - Manual (Page 18)

Setting on SW2 System component Measuring range and description Unit
Outdoor temperature TH7
before fault
-39 – 88
-39 – +88
If the temperature sensor
measures values below 0°C,
the display switches between
the sign, the value,
and 2 spaces.
Ex-
ample: -15 °C:
Impulses
ON
1 2 3 4 5 6
Subcooler temperature SC
before fault
0 – 130
Cooling: TH6 - TH3
Heating: TH5 - TH2
Cooling fin temperature sensor
TH8 before fault
-40 – 200
Hot gas overheating tempera-
ture SHd before fault
0 – 255
Cooling: TH4 - TH6
Heating: TH4 - TH5
0 – 130
If the temperature difference is
over 99 K, the display switches
between the 100s digit, the
10s and 1s digits, and 2 spaces.
Example: 115 K:
-40 – +200
If the temperature sensor
measures values below 0°C,
the display switches between
the sign, the value, and 2
spaces. If the temperature sen-
sor measures values over 99°C,
the display switches between
the 100s digit, the
10s and 1s digits, and 2 spaces.
0 – 255
If the temperature difference is
over 99 K, the display switches
between the 100s digit, the
10s and 1s digits, and 2 spaces.
Example: 150 K:
K
°C
K
ON
ON
ON
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
6
6
6
0.5 s 0.5 s 2 s
„- “ „15“ „ “
0.5 s 0.5 s 2 s
„ 1 “ „50“ „ “
0.5 s 0.5 s 2 s
„1 “ „15“ „ “
REMKO SYSTEM MONITOR
FOR REMKO SUPERTEC INVERTER
18