REMKO SuperTec-Monitor - Manual (Page 5)

The equipment is delivered
in sturdy transport packaging.
Immediately check the equipment
on delivery and make note of any
damage or missing parts on the
delivery note and inform the for-
warding agent and your contractual
partner.
No warranty can be assumed for
later claims.
Transport and
packaging
Description
The REMKO SYSTEM MONITOR
offers you the option to monitor
your system components electroni-
cally on the outdoor unit. You can
query the operating data of all sys-
tem components, enabling you to
perform targeted troubleshooting,
and quickly and easily resolve the
cause of the fault. In the following
text, this function is identified as
the System Monitor, which offers
targeted querying of temperatures,
pressures, voltages, etc.
DIP switch SW2 is located on
the circuit board of the
REMKO SYSTEM MONITOR
NOTE
With the REMKO SYSTEM
MONITOR, REMKO is offering
an external display unit for CMF/
CMT outdoor units, which makes
it both simple and convenient
to query operating data from all
system components. The REMKO
SYSTEM MONITOR is equipped
with a DIP switch (SW2) and a
two-digit, seven-segment LED
display. During fault-free normal
operation this shows the operating
status, and in the event of a fault
shows details on which faults have
occurred on the various system
components. Using DIP switch
SW2 on the REMKO SYSTEM
MONITOR, is it possible to per-
form targeted diagnostics. To do
so, it is necessary to connect the
supplied cable to the CNM con-
nector on the control board of the
CMF/CMT outdoor unit. In the
following pages, you will find the
settings for SW2 and the associ-
ated normal value ranges of the
system monitor.
The REMKO SYSTEM MONI-
TOR is not included in the
scope of delivery of the inverter
heat pump, and must be or-
dered separately. The REMKO
SYSTEM MONITOR can be
used with all outdoor units in
the CMF/CMT range.
You can find a detailed list of
all the fault codes from
page 18 onwards
NOTE
SYSTEM MONITOR for REMKO SuperTec Inverter
5