RGBLink VSP 9516S User Manual - Manual (Page 104)

6. System Setup and Operation
How to Realize LED Display Connection
VSP 9516S User Manual 104
b. Turn the knob, choose <SENDING CARD NO.>, push the knob to confirm, turn the
knob, choose NO.1, push the knob to confirm.
c. Turn the knob, choose <QUICK CONNECTION>, push the knob to confirm. Turn the
knob, choose <RECEIVING CARD SET>, push the knob to confirm, and enter to the
to the next level menu, the OLED module show as follows:
d. Turn the knob, choose <CHOOSE CABLE>, push the knob to confirm. Turn the knob,
choose <PORT D>, push the knob to confirm.
* SENDING CARD TYPE LINSN
SENDING CARD NO. NO.1
BRIGHTNESS 50%
QUICK CONNECTION >>
SENDING CARD TYPE LINSN
> SENDING CARD NO. NO.1
BRIGHTNESS 50%
QUICK CONNECTION >>
SENDING CARD TYPE LINSN
SENDING CARD NO. NO.1
BRIGHTNESS 50%
> QUICK CONNECTION >>
SENDING CARD SET >>
> RECEIVING CARD SET >>
> CHOOSE CABLE PORT U
HORIZONTAL CARD 2
VERTICAL CARD 3
WIDTH 120