RGBLink VSP 9516S User Manual - Manual (Page 44)

4. Menu Orientation
MENU
VSP 9516S User Manual 44
For details, please refer to the instructions in the manual: How to Set up the
Size and Position of the Single Image.
SCREEN: Screen setting, user can change the screen through the digital
setting parameters to easily change the screen size and position. Mainly
used in the LED display. Settings as follow:
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
Mode: Can choose SCREEN SIZE or FULL SIZE.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
For details, please refer to the instructions in the manual: How to Realize
the Screen Size Setting.
RATIO: Aspect ratio setting, user can choose 4:3, 16:9 and DEFAULT.
PICTURE: Picture setting, the sub-menu as following:
BRIGHTNESS: It can change the image brightness via BRIGHTNESS
setting.
CONTRAST: It can change the image contrast via CONTRAST setting.
SATURATION: It can change the image saturation via SATURATION
setting.
SHARPNESS: It can change the image sharpness via SHARPNESS
setting.
COLOR RED: It can change the image color red via this setting.
COLOR GREEN: It can change the image color green via this setting.
COLOR BLUE: It can change the image color blue via this setting.
RESET: If image quality distorts by improper operation, it can be recover by
reset.