RGBLink VSP 9516S User Manual - Manual (Page 123)

VSP 9516S User Manual 123
C. Software Upgrade
IP Software Download Instruction
Turn off the power, take the two coding sw itch to ―ON‖ state as below:
Connect one side of the RJ11 download line to the RS232 on the video
processor, and the other side being connected to the serial port on the PC.
Double click to run flash magic, setting as below:
Firstly, users can choose the right serial port, set the Boud rate to 9600,
choose LPC2368, and to load the aim document (hex file) for IP board
upgrading.
Secondly, tick the item below to confirm.
Finally, click the ―start‖ button.