Sumix SMX-12A2x - Manual (Page 17)

Getting Started: Installing Lens
17
Chapter 3
G
ETTING
S
TARTED
Installing Lens
To use a lens with the camera, remove the cover from the camera and install a lens as
described below. Face the camera down to prevent the sensor contamination.
To install a lens:
1 Face the camera down.
2 Remove the camera cover.
3 Screw the lens in.
To remove the lens
1 Face the camera down.
2 Screw the lens out.
3 Put on the cover.
Note: Before screwing the lens in or putting on the cover, make sure that the surfaces are free from dust.
When you remove the cover, put it facing down to keep dust out.
Connecting the Camera
For connecting the SMX-12A2x Camera to the computer, use the Power Over Ethernet
(PoE) IEEE 802.3af power supply and two RJ 45 standard Ethernet cables. It has two
Ethernet ports: IN and OUT.