Sumix SMX-12A2x - Manual (Page 32)

Tuning Guidelines: Trigger Settings
32 SMX-12A2x Series Gigabit Ethernet Camera User Guide
Figure 4-11 Enabling Hue, Lightness and Saturation sliders
The Matrix option from the drop-down box allows adjusting colors of the video stream
using a calibration file (see
“Color Calibration” on page 35 ).
Trigger Settings
You can initiate video capturing by applying a triggering pulse to the camera. The
External input controls at the Trigger tab allow you to monitor input signals sent to
the camera via the trigger connector. For more information about connector pinouts
and for instructions on how to prepare the connector for use with the camera, see
“External Trigger” on page 45 .
Figure 4-12 Trigger Settings
● Enable external synchronization - after an external equipment has been con-
nected to the camera and a triggering pulse has been applied, check this box to stop
the video stream and to start capturing a frame
● Enable see status - check this box if you want to see if a triggering pulse has been
applied to the camera via connector input 1 or input 2:
● External input1 status - the box checked means that an external pulse has been
applied to the camera via input 1
● External input2 status - the box checked means that an external pulse has been
applied to the camera via input 2