Sumix SMX-12A2x - Manual (Page 46)

External Trigger: Soldering of Connector with Cable
46 SMX-12A2x Series Gigabit Ethernet Camera User Guide
To power the camera via the external trigger, connect pin 3 of the trigger to a stabilized
power source 5 V/1 A. Then connect pin 6 to a ground.
Warning: Simultaneous use of the Hirose trigger and PoE supply for powering the camera is not recommended.
Soldering of Connector with Cable
Prepare a standard (6-core) cable with already opened contacts for soldering with the
connector.
Figure 7-2 A cable for soldering with the connector
Prepare a tweezers-like tool for the connector assembling.