Sumix SMX-12A2x - Manual (Page 27)

Tuning Guidelines: Color Correction Settings
27 SMX-12A2x Series Gigabit Ethernet Camera User Guide
Frame Rate
You can manage frame rate when the video is running. Type in the required value in the
field in the Frame Rate section and press Set. You will not be able to set frame rate
higher or lower than some limits for current viewport size and frequency.
When the High speed shutter mode is checked, the application shows each second
frame of the video stream. It will be useful when camera is running with high
frequencies.
Note: The High speed shutter mode is available only for frequency of 50MHz and higher.
The High speed shutter mode does not work for the 8 bit compress mode.
Color Correction Settings
These controls are available for the SMX-12A2C color model. The Color correction
settings are conversions used to correct colors and intensity of the image displayed by
the application in 8 bit or 10 bit modes. These are four Lookup Tables (LUTs) that
provide output data for mono (all color components) as well as red, green and blue
color components.
Figure 4-6 The Color correction settings
Mono
Use the sliders of the Mono conversions to change Brightness/Contrast/Gamma for all
R, G and B color components simultaneously. After you move a slider, press the Set
button below the Default button to apply the changes.