Output mode – Sumix SMX-12A2x User Manual
Page 26
Tuning Guidelines: Sensor Settings
26
SMX-12A2x Series Gigabit Ethernet Camera User Guide
Figure 4-5 Changing viewport
3
You can select one of the predefined viewport options. If the viewport size is smaller
than maximum viewport size, drag the rectangle across the full viewport resolution
area for the viewport window. You will notice how the image in the View Mode win-
dow changes with the movement.
4
Alternatively, you can change values in the following fields:
●
Offset X, Y fields with coordinates of the top left corner of the rectangle
●
Size X, Y fields with coordinates of the bottom right corner of the rectangle
you can also change it by dragging the video image in the Video mode window.
5
Press Apply to save changes.
Output Mode
The camera can transmit raw video data in one of four output modes. Use the drop-
down box of the Output Mode section to switch between camera modes.
●
8 bit - select this option for viewing video on display
●
8 bit compress - this mode provides the highest frame rate
Note:
Before processing 8 bit compressed camera output, make sure that it is decompressed.
●
10 bit, 12 bit - you can enable these modes for demonstration purposes, e.g. you can
view camera statistics via the Statistics tab in the Settings box.