Teac T-R680RS - Manual (Page 10)

10
Tune in a station you want to listen to (see steps to
of page 8 or “Direct Tuning” on page 9).
Press the MEMORY button. 2
4
1 1
The display briefly shows “SAVE”, and the station is stored in
memory.
You can also use the numeric buttons to select a preset
channel.
For instance, to select preset number 25, press “2” and “5”.
To select numbers less than 10, press “0” and then the
number. As an example, to select number 5, press “0” and
“5”. (Optionally, you may press just the number “5” and
then wait a few seconds.)
When using the numeric buttons, the station is stored
automatically without pressing the MEMORY button.
To store more stations, repeat steps to .
< If you store a new station to a channel, the station previously
stored in the channel will be overwritten.
3 1
While the “MEMORY” indicator is blinking, select a
preset channel to store the station using the
TUNING/PRESET buttons, and then press the MEMORY
button. 3
Up to 30 of the best received stations in your area will be
stored automatically.
Select AM or FM by pressing the corresponding button. 1
Hold down the MEMORY button and release it when
“AUTOSAVE” briefly appears on the display. 2
Preset Tuning
1 2
You can store FM and AM stations from Channel 1 to 30
respectively.
Automatic Memory Presetting
MEMORY Numeric buttons
TUNING/PRESET
Manual Memory Presetting