Teac T-R680RS - Manual (Page 12)

12
< The unit can be programmed to turn on and off (standby) at a
specified time every day.
< Adjust the clock before setting the timer (see page 11).
Setting the start time
Press the TIME SET button twice. 1
Press the TUNING/PRESET/TIME buttons to set the start
time (hour), and then press the MEMORY/SET button. 3
The “minute” value blinks.
Within 5 seconds, press the MEMORY/SET button. 2
The “hour” value blinks.
Press the TUNING/PRESET/TIME buttons to set the start
time (minutes), and then press the MEMORY/SET
button. 4
The start time is stored in memory, and the display returns to
normal.
“ON-TIME” blinks on the display.
< Each time the TIME SET button is pressed, the mode is
changed as follows:
Normal mode
(Frequency or Clock)
TIME SET
ON-TIME OFF-TIME
Setting the stop time
Press the TIME SET button three times. 1
Press the TUNING/PRESET/TIME buttons to set the stop
time (hour), and then press the MEMORY/SET button. 3
The “minute” value blinks.
Within 5 seconds, press the MEMORY/SET button. 2
The “hour” value blinks.
Press the TUNING/PRESET/TIME buttons to set the stop
time (minutes), and then press the MEMORY/SET
button. 4
The stop time is stored in memory, and the display returns to
normal.
“OFF-TIME” blinks on the display.
Timer
MEMORY/SET TIME SET
TUNING/PRESET/TIME