Teac T-R680RS - Manual (Page 9)

9
Direct Tuning
Example: FM 107.5 MHz
Example: AM 1000 kHz
Using this method, the required frequency can be input directly.
Press the DIRECT TUNING button.
The frequency numbers that were displayed should go out.
They will come up again if you don't go on to the next step
within 5 seconds. If this happens, press the DIRECT TUNING
button again.
Input the frequency of the broadcast you want to hear
with the numeric keys. 2
1
< To directly tune to FM frequencies, you need to input two
digits after the decimal point.
< Either in FM or AM mode, if the number you enter in the
rightmost column is wrong and all the preceding numbers are
correct, the tuner tunes to the nearest frequency available.
Sleep Timer
SLEEP 90 (80, 70...or 10)
The SLEEP indicator lights, and the power will be switched off
90 (80, 70 ... or 10) minutes later.
Normal display:
The sleep timer is off.
< When you set the sleep timer, the display is dimmed
automatically.
< If you want to check the remaining time, press the SLEEP
button once. The remaining time (REST) will be displayed for
3 seconds, and then return to the normal display.
The power can be switched off after a specified amount of time.
Press the SLEEP button repeatedly until desired time appears on
the display.
The sleep time can be changed in steps of 10 minutes.