Teac TN-300 - Manual (Page 11)

11
EN
G
LI
SH
C USB port (USB B type)
Connect this to the USB port of a computer to con-
vert the audio signal from this unit to digital and
output it to the computer (page 17).
D DC input connector
After completing all other connections, connect the
included AC adapter (GPE053A-120050-Z) to this
jack.
Confirm that the power plug of the AC adapter is
plugged into a power outlet.
o Unplug the power cord from the outlet when
you are not planning to use the unit for an
extended period of time.
o Do not use any AC adapter other than the one
included (GPE053A-120050-Z).
V Be sure to connect the power cord to an AC
outlet that supplies the correct voltage.
Connection to an outlet that supplies incor-
rect voltage could cause fire or electric shock.
Hold the power plug when plugging it into an
outlet or unplugging it. Never pull or yank on
the power cord.
Unplug the power cord from the outlet when
you are not planning to use the unit for an
extended period of time.
E STANDBY/ON button
Press the STANDBY/ON button to turn the unit on
or put it in standby.
Names and functions of parts
a Turntable
Place records centered on the turntable.
b Counterweight
c Stylus pressure adjustment ring
d Anti-skating dial
e Cue lever
Use this lever to lift the tone arm and to lower it to
the record.
f Tone arm holder
This is a rest for the tone arm. Gently push the clasp
to the right to release the tone arm before playing a
record.
g Tone arm
h Rotation speed setting knob
Set the rotation speed (RPM) suitable for the record.
i START/STOP turntable rotation knob
j Headshell
A N T I – S K A T IN G
3 0
aa
d
e
f
i
h
g
c
j
b