Teac US-800 - Manual (Page 27)

TASCAM US-800
27
7 – Application guide
In this chapter, we explain how to set up
some audio applications for use with this
unit.
Cubase LE 5
For details see the included Cubase LE 5
Quick Start Guide.
Windows XP and Windows
Media Player
1 Close all applications and then open
the “
Control Panel
” from the “
Start
”
menu.
2 Open “
Sounds and Audio Devices
.”
NOTE
If you do not see the above item, click “Sounds,
Speech, and Audio Devices” and it should
appear.
3 Click the “
Audio
” tab, and set the
“
Default device:
” for “
Sound
playback
” to “
US800
”.
4 Click “
OK
.”
5 Start Windows Media Player, select an
audio file and begin playback.
NOTE
If you change this setting while Windows •
Media Player is running, the software will not
recognize that the device has been changed.
In this case, restart Windows Media Player.
If you still cannot hear sound after making
•
the setting and completing the procedures
above, restart the computer.
After making this setting, sound will be
•
output through this unit, but no sound will
be output by the computer’s speakers or
headphone jacks.
Windows Vista or Windows
7 and Windows Media
Player
1 Close all applications and then open
the “
Control Panel
” from the “
Start
”
menu.
2 Open “
Sound
”.
NOTE
If the above item does not appear, click
“Hardware and Sound” and it should appear.
3 Click the “
Playback
” tab, click
“
Speakers US-800
” and click the
“
Set Default
” button. This moves the
green check mark to “
Speakers US800
Audio
.”