Teac GRANDIOSO P1 - Manual (Page 14)

14 14
Names and functions of parts (main unit)
A
MENU button
Use to enter setting mode (page 26).
B
CLOCK indicator
This shows the clock synchronization status.
When the clock sync setting is set to SYNC, MCK22M or
MCK10M, this will begin to blink. When a clock signal is detected
and synchronization occurs, it will stop blinking and stay lit.
C
Remote control signal receiver
This receives signals from the remote control. When using a
remote control, point it toward this receiver when operating it
(page 17).
D
Display
This shows the playback time, track number and other informa-
tion (page 25).
E
Disc tray
Load the disc for playback here (page 18).
F
Tray open/close button (-)
Press to open and close the disc tray (page 20).
G
Stop (8) button
Press to stop playback (page 19).
When stopped, press and hold for at least two seconds to
change the playback area of a Super Audio CD (page 24).
Press when in setting mode to complete changing settings and
show the ordinary display (page 26).
H
Play button (t)
Press to start disc playback (page 18).
During playback the indicator near this button lights.
I
Pause (9) button
Press to pause playback (page 19).
When paused, the indicator near the play button blinks.
J
Skip (.//) buttons
Use to skip to the previous or next track (page 20).
Press and hold for more than one second to search backward/
forward. Press and hold for more than one second repeatedly to
cycle through the three search speeds (page 21).
Use to change parameters when in setting mode (page 26).
A C D F H I J E B G