Ringing control for individual line appearances, Local call forwarding – no answer delay, Personal ringing tone offhk contrl lcfwd – Teo IP Phone 7810 User Manual

Page 32: Offhook ring=single normal single

Advertising
background image

Teo IP Phone 7810 User Guide

32

The current off-hook ringing setting will be

displayed.

Select NORMAL or SINGLE to change the setting.

Press the

OK

key to return to the Personal Ringing

menu or press the

SETUP

key to exit Setup Mode.

Ringing Control for Individual Line Appearances

You can control the audible ringing at your telephone for each

line appearance.
Line appearances set to ALWAYS will ring immediately. Use

this setting for your primary line appearances.
NEVER completely disables ringing on the line appearance. Use

this selection for monitored line appearances that are normally

answered elsewhere.
WAIT delays ringing at your telephone for 2 to 7 ringing cycles

(6 seconds per cycle). Use this option for backup answering on

line appearances that are primarily answered on other phones.
Calls that do not ring, due to the ringing control selection, do

not display call information and are not recorded in the call log

until audible ringing begins.

From the User Options menu, select RING.

(

SETUP

→ USER → RING)

Select CONTRL.
All multifunction keys that are programmed for call

appearances swill have a steady green indication.

Press a lit key to view its current ring control setting.

If you want to change the setting for the selected

key, select ALWAYS, NEVER, or WAIT2-WAIT7.
Consecutive line appearances that share a single phone

number will use the same ringing control setting.

Press the

OK

key to return to the Personal Ringing

menu or press the

SETUP

key to exit Setup Mode.

Local Call Forwarding – No Answer Delay

This option sets the delay in seconds before an unanswered

ringing call is forwarded.

Note: If your phone is connected to a Teo UC System, call

forwarding delay is not controlled by this option.

From the User Options menu, select RING.

(

MENU

→ USER → RING)

Select LCFWD.

Using the dial pad, enter the time in seconds (2-99)

to wait before forwarding a ringing call.

LOC CFWD NOANSWR SEC=12
DELETE CLEAR 123

PERSONAL RINGING
TONE OFFHK CONTRL LCFWD

KEY01=ALWAYS RING ¤
WAIT4 WAIT5 WAIT6 WAIT7

KEY01=ALWAYS RING ¤
ALWAYS NEVER WAIT2 WAIT3

PERSONAL RINGING
TONE OFFHK CONTRL LCFWD

OFFHOOK RING=SINGLE
NORMAL SINGLE

Advertising
This manual is related to the following products: