Thinklogical Q-4300 KMASS Modules Manual User Manual
Page 19
Advertising
STEP 2:
If not connected to the Internet, select No and navigate to where the FPGA Update
application is installed. The driver is in the Install Directory. Proceed to step 6. If using an
internet connection, select: Yes, this time only. Click on Next.
STEP 3:
Select Install the software automatically (Recommended). Click on Next
STEP 4:
Follow the instructions to the Completing the Found New Hardware Wizard Box.
Click on Finish.
Advertising
This manual is related to the following products: