Thinklogical Q-4300 KMASS Modules Manual - Manual (Page 7)

Q-Series KMASS Modules Product Manual 7 Rev. B: August 2013
1.2. System Features
Thinklogical’s Q-Series line of KMASS (Keyboard, Mouse, Audio, Serial, Stereo 3D) Modules
includes a variety of TX and RX models, designed to meet almost any data extension
applications. Each module can be used in our stand-alone Q-1300 Chassis or, for more
extensive applications, our two-module Q-2300 chassis or our four-module Q-4300 chassis,
which will each support any combinations of transmitters and receivers.
The Q-4300’s chassis allows up to four hot-swappable interface modules to be used in a variety of
applications, as either transmitters, receivers, or as transceivers. Q-Series KMASS modules support
two-way, unbalanced audio, high speed USB 2.0 (480 Mbps) and low speed USB HID (1.5 Mbps).
Installation possibilities are expanded with built-in support for either multi-mode or single mode fiber,
making this a convenient and cost effective solution to transmit quality data signals over long distances.
Each module is hot swappable, and in addition, the standard SFP+ optics (with LC connectors) are hot
swappable/pluggable.
Every Q-Series module is fully compatible with Thinklogical’s VX Router ® line of products.
1.2.1. The Q-Series Chassis
Each Q-Series Chassis provides a framework for mounting, powering, upgrading and interfacing
with a variety of modules that perform the functions of a KVM and video distribution system. The
Q-4300 chassis supports up to 4 modules, features redundant power supplies, an LCD/button interface
and provides convenient upgrade ports for the chassis and modules. Fans mounted inside the chassis
provide cooling and all modules and power supplies are hot swappable. The chassis may be rack or
desktop mounted. Other installable modules include our DVI and SDI lines of extenders. (See page 25
to contact a Thinklogical
® sales representative for more details.)