Regulatory compliance – Thinklogical Q-4300 KMASS Modules Manual User Manual
Page 23
Q-Series KMASS Modules Product Manual
23
Rev. B: August 2013
Regulatory Compliance
Thinklogical’s
®
Q-Series products are designed and made in the U.S.A. Q-Series products have been
tested by a certified testing laboratory and found to be compliant with the following standards (both
domestic USA and many international locations):
North America
Safety
ANSI/UL60950-1: 1
st
Edition (2003)
CAN/CSA C22.2 No. 60950-1-03
Electromagnetic Interference
FCC CFR47, Part 15, Class A
Industry Canada ICES-003 Issue 2, Revision 1
LASER Safety
CDRH 21CFR 1040.10
Class 1 LASER Product
All Q-Series modules are designed and identified as Class 1 LASER products
.
Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures.
European Union
Declaration of Conformity
Manufacturer’s Name & Address:
Thinklogical, LLC
®
100 Washington Street
Milford, Connecticut 06460 USA
Telephone 1-203-647-8700
These products comply with the requirements of the Low Voltage Directive 72/23/EEC and the EMC
Directive 89/336/EEC.
Standards with Which Our Products Comply
Safety
CENELEC EN 60950-1, 1
st
Edition (2001)
LASER Safety
IEC60825:2001 Parts 1 and 2
Class 1 LASER Product