Thinklogical SDI to HDMI Converter Manual User Manual
Page 13
SDI to HDMI Converter, Rev. C
13
July, 2012
d:
Noise Reducer 3D Adapt
Sets the Noise Reducer for 3D Adaptive (Temporal) mode.
e:
Noise Reducer Default
Sets the Noise Reducer for Default mode.
f:
Noise Reducer Automatic
Sets the Noise Reducer for Automatic mode.
MAIN MENU:
C:
Video Processing Setup
SUB-MENU:
d:
Picture Control
a:
Set All Levels Default
Restores Contrast, Brightness, Tint, Black, Color Temp levels to defaults.
b:
Set Contrast Level
Enter the Contrast Level 0 to +10. The Default value is 10.
c:
Set Brightness Level
Enter the Brightness Level -100 to +100. The Default value is 0.
d:
Set Tint Level
Enter the Tint Level -180 to +180. The Default value is 5.
e:
Set Black Level
Enter the Black Level 0 to +100. The Default value is 0.
f:
Set Color Temperature
SUB MENU : Video Set Color Temperature Menu
a:
Color Temperature NORMAL
Sets the color temp to 6500.
b:
Set Color Temperature COOL
Sets the color temp to 8000.
c:
Color Temperature WARM
Sets the color temp to 6000.
d:
Color Temperature CUSTOM
Enter Color Temp Level 6000 to 8000 (Normal = 6500)
MAIN MENU:
C:
Video Processing Setup
SUB-MENU:
e:
Edge Enhancer
Selects the menus for Edge Enhancement (EE) video processing functions.
a:
Edge Enhancer OFF
b:
Edge Enhancer LOW
c:
Edge Enhancer MED
d:
Edge Enhancer HIGH