Regulatory and safety, 1 safety requirements, 2 regulatory compliance – Thinklogical SDI to HDMI Converter Manual User Manual
Page 16
SDI to HDMI Converter, Rev. C
16
July, 2012
4. Regulatory and Safety
4.1 Safety Requirements
4.1.1 Symbols Found on Product
Markings and labels on the product follow industry-standard conventions. Regulatory markings
found on the products comply with requirements.
4.2 Regulatory Compliance
Thinklogical
®
products are designed and made in the USA. Our products have been tested by a
nationally recognized testing laboratory and found to be compliant with the following standards
(both domestic USA and many international locations).
4.2.1 North America
These products WILL comply with the following standards:
Safety
•
ANSI/UL60950-1: 1
st
Edition (2003)
•
CAN/CSA C22.2 No. 60950-1-03
Electromagnetic Interference
•
FCC CFR47, Part 15, Class A
•
Industry Canada ICES-003 Issue 2, Revision 1
4.2.2 Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference,
in which case the user may be required to take adequate measures.