Thinklogical SDI to HDMI Converter Manual - Manual (Page 26)

SDI to HDMI Converter, Rev. C 26 July, 2012
APPENDIX C: GUI
The Graphical User Interface (GUI) for the SDI to HDMI Converter was developed to easily
create, set and recall custom configurations. There are 6 main menus that allow you to
configure the Input/Output, Video Processor, Audio, User Configurations, Xtreme 3G and
System Information. There are sub-menus under the video processor menu for Video Control
and Picture Control.
Note: When power has been cycled on a unit it will reset to factory settings unless
the “Set Power On Config” has been set in the User Menu.
Input/Output Menu
This menu allows you to select the input and the format of the output. By clicking the “Take”
button at the bottom of the screen you are able to commit the output format that you have
selected.