Visara eTerm 350 - Manual (Page 57)

707018-006 4-15
Chapter 4. e Term Terminal Properties
• Server Location Tab
• Server Location – Server location (also called the ICA Browser or server
browsing) provides a method for a user at a network-connected Citrix ICA Client
computer to view a list of all Citrix servers and published applications. Each
network protocol maintains a separate and independent master ICA browser. Set
a specific server address for the Citrix server that functions as the master browser
when your network configuration uses routers or gateways, or to eliminate
broadcasts on your network.
• Server Group – Use the Server Group and Address List fields to create lists of
specific servers that you want to designate as primary and backup servers for
connecting to application sets. Backup server groups provide business recovery
for your client in the event that you cannot contact any servers in your primary
group. You can define up to three groups of Citrix servers to which you want to
connect: a primary and two backups. Each group can contain from one to five
servers. When you specify a server group for your client, the client attempts to
contact all the servers within that group simultaneously (broadcasting) and the
first server to respond is the one to which you connect. Use this field to designate
whether the servers entered in the Address List field belong to your Primary, first
backup (Backup 1), or second backup (Backup 2) group.
• Address List – Use the address list field to view and change the list of Citrix
servers used in the selected server group. If you have not selected any servers,
[Auto-Locate] is selected by default.
Click Add to add a Citrix server to your server group’s address list.
Click Delete to remove the selected Citrix server from the Address List.
Note: If (Auto-Locate) is selected, the first server is located automatically.