Vuzix Wrap 1200AR User Guide - Manual (Page 20)

§ Run the VR Manager application.
The first time VR Manager is run, it will sense the Tracker and advise that its Gyros
require zeroing. The gyros zeroing process can also be initiated manually from the
VR Manager’s “Misc. Tools” tab.
§
When the VR Manager’s Zero Gyros screen appears, place the Wrap eyewear on
your desk facing your computer and do not move them while the gyro zeroing
process is being performed.
§
Follow the on-screen instructions.
Upon completion of the gyro zeroing process, the VR Manager program will
complete loading and present you with its Calibration screen.
§ Press the “Begin Calibration” button.
§
Holding your eyewear, position them similar to where they would be when worn
– upright and facing your desktop computer monitor.
The following process will calibrate your tracker for the yaw, pitch and roll axis. X, Y
and Z-axis tracking is not supported by VR Manager and is accessible only through
direct tracking support applications.