Welltech IP-380 v.1.0 - Manual (Page 10)

iP380 User Manual
Welltech Technology Co., Ltd.
10 / 104 2012/11/01
1.5.1. Network Environment Setting
Netwrok Mode: Default NAT Mode
WAN Port: DHCP Client Mode
LAN Port: DHCP Server Enable, IP Address: 192.168.123.1, Mask: 255.255.255.0
1.5.2. Connection
Please connect the personal computer to iP380 LAN port, then set up computer Ethernet to
configure DHCP mode. The computer will get DHCP IP address. (ex. 192.168.123.150). Use Web
browser at your computer at http://192.168.123.1:9999 to enter webpage setup mode of iP380.
1.6. Basic Operations
1.6.1. Phone function
1.6.1.1. Key function
Key Explanation Remark
1 “1”，“-“，“٫”，“!”，“?”，“"”，“@”
2 “2”，“a”，“b”，“c”，“A”，“B”，“C”
3 “3”，“d”，“e”，”f”，“D”，“E”，“F”
4 “4”，“g”，“h”，“I”，“G”，“H”，“I”
5 “5”，“j”，“k”，“l”，“J”，“K”，“L”
6 “6”，“m”，“n”，“o”，“M”，“N”，“O”
7 “7”，“p”，“q”，“r”，“s”，“P”，“Q”，“R”，‘S”
8 “8”，“t”，“u”，“v”，“T”，“U”，“V”
9 “9”，“w”，“x”，“y”，“z”，“W”，“X”，“Y”，“Z”
0 “0”，“space”
* “*”，“•”，“:”，“＋”
# “#”
A/a/1 change English
Letter upper/lower
Case and number.
a. During the talk (use handset or handfree),
press this key then LED will brighten.
Then the phone call voice change to
headset.
b. Incoming call, press this key then LED will
brighten. Picked up the call use headset.
c. Press this key again then the LED will
darken and drop the phone call.
Headset
a. Press this key then the LED will brighten
(At the same time, the Message Lights for
message inicator steady ON). Any
incoming call is denied, but call can be
dialed out.
b. Press this key again, the LED will darken
and cancel DND state. (At the same time,
the message lights for message indicator
disabled. If iP380 have other function to
use message lights, the lights remains
DND (Do Not
Disturb)