Welltech IP-380 v.1.0 - Manual (Page 62)

iP380 User Manual
Welltech Technology Co., Ltd.
62 / 104 2012/11/01
(Figure 4)
2.3.2. DMZ & MAC Clone (DMZ & MAC Setting)
2.3.2.1. Functions
DMZ & MAC Clone Provide functions to Setup DMZ and MAC Clone.
2.3.2.2. Instruction
Item Explanation
DMZ Active Defualt: Disable; When you Enable this function, all the incoming
packages will transfer to the assigned IP address.
Provide options: Disable, Enable.
DMZ IP Address Default: 0.0.0.0.
The assigned IP address type is xxx.xxx.xxx.xxx of maximum 15
bytes.
MAC Clone Active Default: Disable; When you Enable this function, iP380 will provide
MAC ID Clone of PC through LAN Port.
Provide options: Disable, Enable.
Note:
1. MAC Clone function: Must use “Device Active” to Setup “Router”
mode, then enable to get IP address automatically.
2. Connect PC to LAN port of iP380, After PC get the IP address and
use LAN port login web page. Be able to Setup this function to
configure.
Submit [Button] Save the Settings.
2.3.2.3. Special Considerations
If MAC Clone want to retrieve iP380 originally MAC address, Please reset to default Setting