Welltech IP-380 v.1.0 - Manual (Page 34)

iP380 User Manual
Welltech Technology Co., Ltd.
34 / 104 2012/11/01
Item Explanation
Use Dial Plan Default is Basic dial plan Setting. Select dial function mode. When
select Advanced, the dial function will use
Dial Plan - Advanced web
page Setting. Provide drop-down options: Basic, Advanced.
Basic: Use basic web page Dial Plan and Dial Now rules.
Advanced: Use Dial Plan - Advanced rules; Disabled [Dial Plan & Dial
Now] Setting field automatically.
Dial Plan Setup dialing properties to add number or Replace Number .
Index Shows the serial number. Provide 4 sets to add numbers or drop
numbers.
Drop Prefix Default: Disable。 When Setting up Enable and encountering the
matched rule, the [Prefix] will be replaced by t he dialing number。
When Setting up Disable , and encountering the matched rule, the
[Pefix] will be added in front of the dialing number.
Prefix Setup the number to add or drop . These clolumes can enter numbers;
maximum length is 8 bytes.
Replace Rule Setup the matched rule. This column can enter numbers or signs;
maximum length is 40 bytes.
Sign: [+, x].
+ represents “or”
. For example: 123+456+334+5xx, it represents
“123” or “456” or “334” or “5xx”.
x: 0~9 , for example: 5xx，if the first dialing number is “5”, [Prefix] will
replace or add it.
Note: This dial rule is 『x+number』combination. If the dial number is
fully compliance with the code length, the dial replace rule does not
running.
Dial Now Setup speed dial specification rules.
Index Shows the serial number. Provide 8 sets for Dial Plan.
Dial Now Rule Provide the rules for dialing at once. When encountering the matched
rule, system will dial number at once without receiving “#” or waiting
past [Auto Dial Time].
This column can enter numbers or signs; maximum length is 80 bytes.
Sign: [*, #, +, x].
+ represent “or”.
x: 0~9.
Inter Digit Time Default: 5 seconds.
After waiting for a while, but didn’t enter any number, Auto Dial will run
automatically.
Inter Digit Time period: (3~9 seconds). Provide option 3~9.
Key As Send# Default: Enable.
Configure
# key as Send Out command key after dial number. If you
select Disable at this option, The dial number will wait for your desire
Inter Digit Time to send out.
# Format is %23 Default is Disable; Use [#] word to send %23 singal. Provide
drop-down options: Disable, Enable.
Enable: Use [#] word to send %23 singal.
Submit [Button] Save the Settings.