Welltech IP-380 v.1.0 - Manual (Page 6)

iP380 User Manual
Welltech Technology Co., Ltd.
6 / 104 2012/11/01
1.4. Rear Interface Description
Interface Explanation
DC 9~12V
(Internal-Positive;
External-Negative)
Connect AC/DC power adaptor.
LAN Connect personal computer.
WAN(POE)
Connect ADSL or Cable Modem device. (If model have PoE feature, use
this port to connect PoE switch).
Connect iP380 handset.
Connect 3.5mm connector specifications Microphone.
Connect 3.5mm connector specifications headset Ear Phone.
1.5. Hardware Installation
After set up the iP380 device, please follow these steps to connect iP380 accordingly.
1. One of the power cord connected to the iP380 AC/DC power adaptor connecting seat, the AC
outlet connected to the wall electric outlet.
2. Use LAN port through RJ-45 Ethernet line to connect personal computer.
3. Use RJ-45 Ethernet line to connect iP380 WAN port and ADSL/Cable modem、Router or other
switch.
4. The RJ-9 handset line connect iP380 and handset.
5. 3.5mm headset connector connected to the green seat, and 3.5mm MIC connector connected
to the red seat.
6. Once the phone power on, the LCD monitor will show the booting word. Wait a few minutes,
the iP380 boot completely then you can use LCD or web page to configure your account and
phone number.
7. Install LAN port two free pairs wire for external NC/NO control.