Welltech IP-380 v.1.0 - Manual (Page 18)

iP380 User Manual
Welltech Technology Co., Ltd.
18 / 104 2012/11/01
First Layer Secondsond
Layer
Third Layer Fourth Layer Explanation
2.TFTP Use TFTP mode
3.FTP Use FTP mode
4.HTTP Use HTTP mode
2.Upgrade
system
1.Upgrade
Now
1. Yes
2. No
Execute/Cancel
upgrade
automatic
2.Upgrade via
*Admin Use
1.Disable Stop upgrade
automatically
feature
2.TFTP Use TFTP mode
3.FTP Use FTP mode
4.HTTP Use HTTP mode
3.Status No new s/w
Next=xx-xx
xx:xx
Show state and
next upgrade
time
4.Reset Time 1. Yes
2. No
Reset/Stop
upgrade time
automatically
3.Default
Setting
1.Load default Start reset to
default
configuration
2.Abort Stop reset to
default
configuration
4.System
Authent
Set up system
permissions
5.Version Device version
information
6.LCD
Language
1.English LCD English
interface
2.Portugal LCD Portugal
interface
7.Restart Restart device
8.Auto Reboot 1. Enable Enable auto
reboot feature
2. Disable Disable auto
reboot feature
1.6.2. Dial function Introduction
1.6.2.1. iP380 Dial Feature
There are three ways to dial number：
1. Select L1~L3 line, After dial number direct, press “#” key to dial out immediately.
2. Select L1~L3 line. Enter phone number and wait for 5 seconds to dial out automatically.
(Default)
3. In ON-Hook state, Dial number and use C key to modify wrong number. After checking
correct number, press # key to dial out.
Example:
 Dial other extension number at the same proxy server, for instance, 1008. Just pick up the
phone and dial number 1008, than press “#” key or wait 5 seconds to dial out.
 Dial a PSTN number, ex. 0800024365, maybe need to add prefix code before the phone