Welltech IP-380 v.1.0 - Manual (Page 80)

iP380 User Manual
Welltech Technology Co., Ltd.
80 / 104 2012/11/01
Item Explanation
*This function must be supported from SIP Server.
Server Auto
Discovery
Default: Disable; DHCP TFTP Option 66 (TFTP): DHCP Server will offer
the Option 66 Server IP address into the column of system [TFTP
Server] when it assigns IP.
Broadcasting: Discovering the Server by broadcasting, the Server will
send the information of Type and Server to iP380, it will fill in these
information to the corresponding columns.
Provide options: Disable, DHCP TFTP Option 66 (TFTP), Broadcasting.
*This function must be supported by Server.
Scheduling Default: Disable; Execute the Configuration regularly.
When this function is on, system will check the Configuration Server by
[Next Config Time].
Provide options: Disable, Enable.
Note: The time parameter use [Auto Update Setting] web page’s
[Scheduling Time & Date].
TFTP Server This column can only enter IP with the format of xxx.xxx.xxx.xxx;
maximum length is 15 bytes.
TFTP File Path This column can enter numbers or strings; maximum length is 63
bytes with the “/” in the end, ex: 123/.
HTTP Server This column can enter IP or Domain Name; maximum length is 63
bytes.
HTTP File Path This column can enter numbers or strings; maximum length is 63
bytes with the “/” in the end, ex: 123/.
FTP Server This column can enter IP or Domain Name; maximum length is 63
bytes.
FTP User Name This column can enter IP or Domain Name; maximum length is 63
bytes.
FTP Password This column can enter IP or Domain Name; maximum length is 63
bytes.
File File Path This column can enter numbers or strings; maximum length is 63
bytes with the “/” in the end, ex: 123/.
Next Configuration
Time
System will check the Configuration Server when the Next config time
is up.
The start counting date is the next day, so the Next configuration time
will add one day.
Count rule： the next day + days + time period + MACaddress +
random number = Next config time.
Submit [Button] Save the settings.
2.5.2.3. Operate Instruction
Example 1: Configuration by HTTP
Step 1: Please complete MACID.dat first, and place it at the path of the designated Server.
Step 2: In [Auto Provision Setting] web page, Set up [Provision Active: HTTP, HTTP Server:
192.168.50.2, HTTP Path: /download/] (See Figure 1).
(Figure 1)