Welltech IP-380 v.1.0 - Manual (Page 44)

iP380 User Manual
Welltech Technology Co., Ltd.
44 / 104 2012/11/01
Item Explanation
Secondsond DNS Default: 168.95.1.1.
The enter type is xxx.xxx.xxx.xxx of 15 bytes.
MAC Address Shows the MAC ID address.
System Name Default: VOIP_Phone.
This column can enter numbers and strings; maximum length is 15
bytes.
PPPoE User This column can enter numbers and strings; maximum length is 32
bytes.
PPPoE Password This column can enter numbers and strings; maximum length is 32
bytes.
PPPoE Service
Name
This column can enter numbers and strings; maximum length is 32
bytes.
*The information of this column is provided by ISP, if you don’t known
what is the data, do not Setup it.
PPPoE AC Name This column can enter numbers and strings; maximum length is 32
bytes.
*The data of this column is provided by ISP, if you don’t known what is
the data, do not setup it.
Submit [Button] Save the settings.
2.2.1.3. Operate Instruction
Example 1: Check Host Name
Step 1: In [WAN Setting] web page, Setup [WAN Active: DHCP, System Name: VOIP_PHONE]
(See Figure 1).
(Figure 1)
Step 2: In [System Status] web page, User can view [WAN] port network status (See Figure 2).
(Figure 2)
Example 2: Check PPPoE Service Name & AC Name
Step 1: In [WAN Setting] web page, Setup [WAN Active: PPPoE, PPPoE User: [email protected],
PPPoE Password: test, PPPoE Service Name: good, PPPoE AC Name: GS-BRAS-D09] (See
Figure 3).