Welltech SIPPBX 6200 V.3.1.0 - Manual (Page 130)

Welltech Computer Co., Ltd.
- Access Code 1 Goto: It is used when the user is calling from his phone and
would like to access the voice mail. The system will only ask for VMS
password.
- Access Code 2 Goto: It is used when the user is not calling from his phone
but would like to access his voice mail. The system will ask for voice mail
account and password.
• : VMS Personal Greeting record
This component is used for caller to record their owned personal greeting by
phone-set.
Figure 7.3-3
- Start Prompt: Prompt for start to leave message
- Auto-Replay
Prompt: Prompt for auto-replay
- Confirm Prompt: Prompt for confirming the leaved message
- Confirm Error Prompt: Prompt if not confirm the leaved message by user
- Max Record Time: Maximum time to be recorded
- Max Retry: The maximum retry times for leave message
- DTMF Receive Timeout: The maximum time to receive confirm from user
- Stop Key: Stop key
- Confirm Key: Confirm key
- Re-Record Key: re-record key
- Record Beep Tone: Record after beep tone
- Auto-Replay: Auto replay or not
- Interrupted by key: Stop play when user press any key
- Clear Digits before start: To clear the digits before start to play
- Success Goto: Next component to be executed if the operation is
SIPPBX 6200S/GS Release 3.1.0 User Guide - 130 -