Welltech SIPPBX 6200 V.3.1.0 - Manual (Page 72)

Welltech Computer Co., Ltd.
SIPPBX 6200S/GS Release 3.1.0 User Guide - 72 -
not. If it is set to automatic, the email From address will be
Telno@SIPPBX_IP.
• Manual Assign Address: Manual assign the FROM mail address
• Email Priority: Email priority: none, low, normal or high
• Email Subject: Email subject. The following variable can be used for VMS
Email notice:
- $ANI$: Calling Number
- $MSG_TIME$: The voice mail message date and time
- $MSG_FILE$: The voice mail message file name
• Char set: Character set setting
• MP3 Attach: attach MP3 file or not
• Rich Email: Rich email(with logo and logo file) or not
• Rich Email Logo: Add rich email Logo or not
• Logo File (GIF only): Logo file name
• MP3 Attached file bit rate: The bit rate to attach the MP3 file. You can adjust
this rate to have better performance. It is recommended to use 24K or 32K
sample rate. The higher bit-rate will have bigger MP3 attachment mail size.
Click the MWI button to set message waiting indicator parameters as figure
6.4-3:
Figure 6.4-3
Parameter Description:
• MWI Service Account: Message Waiting Indicator Service code. You need
to have this service code setup in your CPE in order to get the voice mail
display message.
• MWI Listen UDP Port: MWI listen UDP Port (8080-8085)
• Authentication Mode: Reply 200 or 202 when receive a subscription.
• Min Expire Time (min): Min expire time of MWI subscription in minutes.
• Max Subscriptions: Max subscriptions for the MWI service. Please don’t
change it unless under Welltech instruction.