Westermo IDW-90 AT - Manual (Page 23)

23 6620-3200
Table 1 S-registers
Register Function Range Units Saved Default Note
S0 Rings to Auto-Answer 0–255 rings * 1
S1 Ring Counter 0–255 rings 0
S2 Escape Character ASCII 0–255 ASCII * 43 (02Bh)
S3 Carriage Return Character 0–127 ASCII * 13 (0Dh)
S4 Line Feed Character 0–127 ASCII * 10 (0Ah)
S5 Backspace Character 0–128 ASCII * 8
S6 Dial delay 0–255 ASCII *
S7 Wait Time for Carrier, Silence,
or Dial Tone
0-60 s * 50
S9 Enable PNP functionality
for Windows
0–1 ASCII 1
S10 Lost Carrier To Hang Up Delay 1–255 0.1 s * 14 PSTN
S16 Last occurred CAPI/ISDN
error cause
– –
S30 Disconnect inactivity timer
See *idle
0-255 10s * 0
S36 LAPM Failure Control – – * 7 PSTN
S40 General Bit-Mapped Options
Status
– – * 104 (68h) PSTN
S41 General Bit-Mapped Options
Status
– – * 195 (C3h) PSTN
S46 Data Compression Control – – * 138 PSTN
S48 V.42 Negotiation Control – – * 7 PSTN
S86 Analogue Call Failure
Indication
0–26 – 21 PSTN
S90 Last incoming ISDN calling
number (CLIP)
– –
S91 PSTN Transmit Attenuation Level 0–15 dBm * 13 PSTN
S93 Unknown AT command handling 0,1 ASCII * 0
S210 V.34 Symbol Rate 0–255 – 13 (0Dh) PSTN
* Register value may be stored in the user profiles with the &W command.