Westermo IDW-90 AT - Manual (Page 93)

93 6620-3200
Table 10 Call Setup Result Codes
Code Definition
0 No previous call (modem log has been cleared since any previous calls)
1 No dial tone detected
2 Reorder signal detected, network busy
3 Busy signal detected
4 No recognized signal detected (e.g., no signal, or nothing recognizable)
5 Voice detected * if this is a voice modem (e.g., V.253) operating in voice mode
(e.g., +FCLASS=8.0)
7 Data Answering signal detected (e.g., V.25 ANS, V.8 ANSam)
8 Data Calling signal detected (e.g., V.25 CT, V.8 CI)
9 Fax Answering signal detected (e.g., T.30 CED, DIS)
A Fax Calling signal detected (e.g., T.30 CNG)
B V.8bis signal detected
Table 11 Multimedia Modes
Code Definition
0 Data Only
1 Fax Only
2 Voice
3 VoiceView(tm)
4 ASVD, V.61
8 DSVD, V.70
9 Video-telephony, H.324
A Other V.80 call
Table 13 V.34 INFO bit report
Bits Source bits Definition
31–30 INFO0 bit 20; 0
20–29 INFOc bits 79–88
16–19 INFOc bits 26–29 or 35–38 or 44–47
Pre-emphasis field, selected by the symbol
or 53–56 or 62–65 or 71–74 rate chosen
12–15 INFOa bits 26–29
10–11 MP bit 50; 0
0–9 INFOa bits 40–49
Table 12 Multimedia Modes
Code Definition
0 Async data
1 V.80 transparent synchronous mode
2 V.80 framed synchronous mode