Westermo IDW-90 AT - Manual (Page 53)

53 6620-3200
msno – Multiple Subscriber Number for outgoing calls
Own MSN (Multiple Subscriber Number) for outgoing calls.
msno - no "msn" value will be used for outgoing calls. (default)
msno nn set "msno" to nn = string of digits (max length = 22)
msno show current setting of "msno".
nui – Nui and password
Setup nui and password sent with an outgoing X.25 call packet.
nui and password has to be entered as ASCII characters.
(X.25 B channel and X.31 D channel only).
prot – B channel protocol
Transmission protocol for data transfer
-0: V.110 asynchronous (Mainly for access to GSM network)
-3: HDLC async to sync (Async PPP to sync PPP, conversion single link i.e. for Internet / PPP
dial-up network access)
-4: HDLC transparent (octets are packed into HDLC frames)
-5: Byte transparent (raw B channel data)
10: X.75- SLP (For file and data transfer i.e. for BBS access, (default)
13: V.120 For file and data transfer i.e.AOL/CompuServe access
20: X.31 B channel (X.25 B channel, access to X.25 packet switched network over
B-channel)
21: X.31 D channel (X.25 D channel, access to X25 packet switched network over
D-channel
31: ML-PPP (ML-PPP, Async to sync PPP conversion in Multilink PPP mode,
for internet access)
prty – Asynchronous parity
Parity of asynchronous character (default: no parity)
0: No parity.
1: Even parity.
2: Odd parity
ptp – ISDN interface type
Select type of ISDN interface:
0: select multipoint mode (to connect ISDN terminals, (default)
1: select point to point mode (to connect ISDN switching systems)
pvc – X.25 connections permanent virtual circuits usage
Enable usage of permanent virtual connections instead of switched logical
connections. X.25 channel number 0 will be used.
pvc = 1: enable (default 0)
quit, exit – Activate parameter changes
Activates the actual parameter settings and leave the configurator
(without storing the parameter in non volatile memory).