Using the flush mount, E 22, Hardware manual – ACTi I91 User Manual
Page 22
Hardware Manual
Using the Flush Mount
Use the Flush Mount when installing the camera on a dropped ceiling; there is space above
the ceiling where the camera body can be hidden from view and only the dome cover can be
seen underneath the ceiling.
NOTE:
The Flush Mount is not included in the camera package. Contact your sales agents to
purchase.
Before installation, prepare the following:
Flush Mount Kit
Other Tools (not supplied)
Flush Mount
Drill template
Screw (1)
Foam rubber pads (3)
Fixing bracket
Jig saw
Phillips screwdriver
To mount the camera, follow the procedures below:
Step 1: Drill a Hole on the Ceiling
Drill a 184-mm diameter hole on the ceiling where you want to mount the camera, then route
the network cable, power adapter, and other cables (e.g. DI/DO, audio cables, etc.) through
the hole.